AIMCATS can be given from home

wireless range extender n300 dap-1320 - dap-1320 english contents of packaging wireless range ...

  • WIRELESS RANGE EXTENDER N300 DAP-1320

    QUICK INSTALLATION GUIDE INSTALLATION GUIDE GUIDE DE DINSTALLATIONGUA INSTALACINGUIDA DI INSTALLAZIONEINSTALLATIEHANDLEIDINGINSTRUKCJA INSTALACJIINSTALAN PRUKATELEPTSI SEGDLETINSTALLASJONSVEILEDNINGINSTALLATIONSVEJLEDNINGASENNUSOPASINSTALLATIONSGUIDEGUIA DE INSTALAO VODI ZA BRZU INSTALACIJUKRATKA Navodila ZA UPORABOGHID DE INSTALARE RAPID

    UK www.dlink.com IRELAND www.dlink.com GERMANY www.dlink.com FRANCE www.dlink.com SPAIN www.dlink.com ITALY www.dlink.com NETHERLANDS www.dlink.com BELGIUM www.dlink.comLUXEMBURG www. dlink.com POLAND www.dlink.comCZECH www.dlink.comHUNGARY www.dlink.comNORWAY www.dlink.comDENMARK www.dlink.comFINLAND www.dlink.comSWEDEN www.dlink.comGREECE www.dlink.comPORTUGAL www.dlink.com

  • DAP-1320 1

    EN

    GLIS

    H

    QRS

    QRS

  • DAP-13202

    EN

    GLI

    SH CONTENTS OF

    PACKAGING

    WIRELESS RANGE EXTENDER N300 DAP-1320

    WI-FI CONFIGURATION CARD

    If any of these items are missing from your packaging, contact your reseller.

    INTRODUCTION

    The DAP-1320 extends the wireless coverage of an existing AP (access point) or wireless router, allowing you to reach more parts of your home with wireless.

    Extend the wireless coverage of another AP or wireless router.Smartphone

    Internet modem computer

    RouterDAP-1320

    Tablet

  • DAP-1320 3

    EN

    GLIS

    H

    PRODUCT SETUPSETUP

    SELECT YOUR METHOD There are two methods available for setting up the DAP-1320 - with the QRS Mobile App, or using Wi-Fi Protected Setup (WPS).

    SET UP DAP-1320 WITH QRS MOBILE APP

    Open QRS Mobile and the Setup Wizard will appear. Tap start to begin. The DAP-1320 will first scan for wireless networks from nearby wireless routers or APs. Select the wireless network that you wish to extend, and enter the password (if required).

    You can either keep the current network name (SSID) and password for the extended Wi-Fi network, or enter a new network name (SSID) and password. Then, you can choose to create an admin password to access the DAP-1320's web-based configuration utility. Tap Next to continue.Note: If you choose to change the SSID and password, it is recommended that you make a record of this information for future reference.

    A summary of the network settings will then be displayed. Once you are satisfied, click Save, and the setup wizard will reboot the DAP-1320 for the new settings to take effect. The DAP-1320's extended network can now be used.

    First, make sure that QRS Mobile app is installed on your phone or tablet. Then connect to the DAP-1320 from your mobile device's wireless utility. Select the DAP-1320 network name (SSID) and enter the password (both the SSID and password are on your Wi-Fi Configuration Card).

  • DAP-13204

    EN

    GLI

    SH

    SET UP DAP-1320 USING Wi-Fi PROTECTED SETUP (WPS)

    NOTE: To connect to a wireless router or AP and extend the Wi-Fi network in your home, please make sure the source router or AP features a WPS Push Button.

    PRODUCT SETUPSETUP

    Plug the DAP-1320 into a wall outlet and wait until the power LED is blinking amber. Push the WPS button on the source wireless router or AP, and then push the WPS button on the DAP-1320. The LED will start to flash green.

    The DAP-1320 is now ready to share the extended Wi-Fi network with your PCs and mobile devices. Connect to the extension created by the DAP-1320 using the following network name (SSID): [Your routers SSID] -EXT

    Please allow up to two minutes for the process to finish. The LED will turn solid green when the DAP-1320 has connected successfully to the source wireless router or AP.

    If the LED is lit solid amber after the connection process has finished, the DAP-1320 has established a poor quality connection. To improve the connection quality, the DAP-1320 should be relocated to a wall outlet closer to the source wireless router or AP.

    NOTE: The DAP-1320 can also be configured using the web GUI. After you have plugged the DAP-1320 into a wall outlet and the power LED is blinking amber, go to wireless utility on your computer, select the DAP-1320 network, and enter the password (this is on your Wi-Fi Configuration Card) . Then open a web browser and type http://dlinkap.local./ By default, the username is Admin, and the password field should be left blank. Please refer to the product manual for further information on configuring the DAP-1320 using the web GUI.

  • DAP-1320 5

    EN

    GLIS

    H

    TROUBLESHOOTINGSETUP AND CONFIGURATION PROBLEMS

    1. HOW DO I RESET MY DAP-1320 WIRELESS RANGE EXTENDER N300 TO FACTORY DEFAULT SETTINGS? - Ensure the product is powered on.- Using a paperclip, press and hold the reset button on the bottom of the device for 5

    seconds. Note: Resetting the product to the factory default will erase the current configuration settings. The default Wi-Fi network name (SSID) and password are printed on the DAP-1320's Wi-Fi Configuration Card.

    2. HOW DO I CONNECT A PC OR OTHER DEVICE TO THE DAP-1320 IF I HAVE FORGOTTEN MY WI-FI NETWORK NAME (SSID) OR WI-FI PASSWORD? - If you haven't changed the extended Wi-Fi network's settings, you can use the network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card.

    - If you did change the network name (SSID) or Wi-Fi password and you did not record this information on the Wi-Fi Configuration Card or somewhere else, you must reset the device as described in Question 1 above.

    - It is recommended that you make a record of this information so that you can easily connect additional wireless devices in the future. You can use the included Wi-Fi Configuration Card to record this important information for future use.

    TECHNICAL SUPPORT

    United Kingdom (Mon-Fri), Website: http: //www.dlink.com Home Wireless / Broadband 0871 873 3000 (9.00am06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am-5.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri), Website: http: //www.dlink.comAll Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am -02.00pm) Phone rates: 0.05ppm peak, 0.045ppm off peak times

  • DAP-13206

    DE

    UT

    SC

    H

    QRS

    QRS

  • DAP-1320 7

    DE

    UT

    SC

    H

    PACKAGE CONTENTS

    WIRELESS RANGE EXTENDER N300 DAP-1320

    WI-FI CONFIGURATION CARD

    If any of these items are missing from your package, please contact your retailer.

    INTRODUCTION The DAP-1320 extends the wireless coverage of an AP (Access Point) or wireless router, allowing you to expand the wireless network in your home.

    Extend the wireless coverage of another AP or wireless router.

    Internet modem

    computer

    DAP-1320 router

    Smartphone

    Tablet pc

  • DAP-13208

    DE

    UT

    SC

    H

    ESTABLISHING THE PRODUCT SETUP

    First make sure that the QRS Mobile App is installed on your phone or tablet PC. Then connect to the DAP-1320 from your wireless utility on the mobile device. Select the DAP-1320 network name (SSID) and enter the password (both the SSID and the password can be found on your Wi-Fi configuration card).

    Open QRS Mobile and the setup wizard will appear. Click on 'Start' to begin. The DAP-1320 first searches for radio networks from nearby wireless routers or APs. Select the wireless network that you want to expand and, if necessary, enter the password.

    You can either accept the current network name (SSID) and password for the extended Wi-Fi network, or you can enter a new network name (SSID) and password. You can then create an admin password to access the DAP-1320 web-based configuration utility. Tap Next to continue. Note: If you need to change the SSID and password, please make a note of this information for future reference.

    An overview of the network settings is then displayed. When you are satisfied with the information displayed, click 'Save'. The setup wizard will restart the DAP-1320 for the new settings to take effect. The DAP-1320 can now expand the Wi-Fi network for you.

    CHOOSE YOUR METHOD You have two options for setting up the DAP-1320 - using the QRS Mobile App and One-Touch AP Configuration.

    SETTING UP THE DAP-1320 USING THE QRS MOBILE APP

  • DAP-1320 9

    DE

    UT

    SC

    H

    SET UP THE DAP-1320 USING Wi-Fi PROTECTED SETUP (WPS)

    NOTE: To connect to a wireless router or AP to expand the Wi-Fi network in your home, please make sure the router or AP has a WPS button.

    ESTABLISHING THE PRODUCT SETUP

    Plug the DAP-1320 into a wall socket and wait for the power LED to glow amber. Press the WPS button on the source wireless router or AP, and then press the WPS button on the DAP-1320. The LED starts to flash green.

    It takes up to two minutes for the process to complete. The LED will be solid green as soon as the DAP-1320 is successfully connected to the wireless router or AP.

    If the LED lights up solid yellow after the connection process has been completed, this indicates that the DAP-1320 has established a connection of poor quality. To improve the connection quality, the DAP-1320 should be connected to a wall socket